Double wall slotted (drainage purposes) or perforated (infiltration use) corrugated high density polyethylene pipe. It is flexible.
|Outer diameter||UNE EN 61386-1||mm||110|
|Inner diameter||UNE EN 61386-2-4||mm||93|
|Outer diameter||UNE EN 61386-1||mm||160|
|Inner diameter||UNE EN 61386-2-4||mm||140|
|Ring stiffness||UNE EN ISO 9969||kN/m2||4|
|Perforation type / slotted/ perforated Ø15||-||º||360|
|Slits surface pipe Ø 110||-||cm2||≥ 44 (~50)|
|Slits surface pipe Ø 160||-||cm2||≥ 75 (~85)|
|UNE 53994: 2011 Plastics. Thermoplastics pipes and fittings with metallic reinforce for building and civil engineering sub-soil drainage.|
EPS geosintetic particles with a particular design to achieve high water flow and void space. High content of post industrial recycled material from strictly sorted sources. Carefully tested. Narrow molecular weight distribution despite recycling. Cell size structure suitable for high compressive strength. It is not brittle at subzero temperatures. Works as gravel replacement.
Chemical Resistance: It is a large molecular weight compound with a non reactive structure. It is resistant to diluted basic and acidic media. It is not attacked or degraded by long exposures to either bleach, soap solutions, or common household products that are poured down the drain.
|Bulk specific weight||UNE 92120-2:1998||kg/m3||10|
|Specific weight||UNE 83134||kg/m3||20|
|Water absorption 7 days||UNE EN 12087:1997||%||2,0|
|Water absorption 21 days||UNE EN 12087:1997||%||2,2|
|Particle size distribution||UNE EN 933-1||% pass||
<8 mm: 0
< 20 mm: 73
< 25 mm: 100
|Working temperature||-||ºC||-50 to +65|
Geotextile needle punched filter. Does not need to support heavy load puncture compared with traditional gravel drainage. It is printed longitudinally with a line displaying the words " This side up". Segments must be installed positioning this line upwards. In between the netting and aggregate there is a geotextile filter covering 3/4 of the bundle perimeter. The uncovered part (1/4) must be placed facing the bottom of the trench. The fabric is used to prevent the soil intrusion.
|Bonding technique||-||-||Needle punched|
|Mass per unit area||UNE EN ISO 9864||g/m2||100|
|Thickness 2 kPa||UNE EN ISO 9863-1||mm||0,7|
|Tensile strength MD/CMD||UNE EN ISO 10319||kN/m||8,0/8,0|
|Elongation at max. load MD/CMD||UNE EN ISO 10319||%||90/80|
|Static puncture resistance (CBR)||UNE EN ISO 12236||N||1300|
|Cone drop test||UNE EN ISO 13433||mm||28|
|Water permeability||UNE EN ISO 11058||m3/s/m2||0,120|
|In plane capacity @ 20 kPa||UNE EN ISO 12958||m3/s/m||1x10-6|
|Opening size O90||UNE EN ISO 12956||μm||80|
Net is neccesary to wrap and hold the pipe, particles and geotextil filter in place. It is UV protected and elastic.
|Weight per unit (DR300)||g/m||67|
|Weight per unit (DR370)||g/m||76|
|Net type||-||Oriented tubular|
drenotube® bundles are 3 or 6 meter long. Every segment includes a fast coupler to easily join the modules. The product is available in two diameters.
|Length||m||3 or 6|
|Bundle diameter (DR300)||mm||300|
|Bundle diameter (DR300)||mm||370|
NOTE: EPS aggregate particles are lighter than water, therefore, it would be expected that natural buoyancy forces would tend to make drenotube® float out of ground when ponding occurs. Field experience has shown, however, that this is not a problem when systems have a minimum of 200 mm soil cover.
IMPORTANT: Despite the geotextile filter is UV protected, due to its fine fiber structure it is necessary to backfill the trench inmediately after installation to avoid exposure to sunlight.
drenotube® is packed with a polythylene UV protected bag. Do not remove the shipping and UV protective bag until the planned installation day.