Test Report List

FUMOSO INDUSTRIAL S.A. is the manufacturer of the drenotube® product.


Certificates of Test Reports related to drenotube® and completed by AITEX Textile Research Institute, testing drenotube® as a finished product.

The following tests are available:
Nº 2010GT0206 Determination of the compression properties of the drainage geocomposite drenotube®
AITEX  Report completion date 31/01/2011


Nº 2010GT0207 Determination of the compression properties of the drainage geocomposite drenotube®
AITEX same testing as Nº 2010GT0206 carried out with hydrolysis aged samples. Results are later compared with new material.
Report completion date 31/05/2011


Nº 2010GT0208 Determination of the compression properties of the drainage geocomposite drenotube®
AITEX same testing as Nº 2010GT0206 carried out with aged oxidized samples. Results are later compared with new material.
Report completion date 31/01/2011


Test carried out with EPS geocomposite as a gravel substitute implemented in drenotube®.
Nº 2010GT0187 Determination of flow capacity
AITEX Standard UNE-EN ISO 12958:2010
Report completion date 30/11/2010

 

Certificates of Test Reports related to drenotube®  and completed by CECAM
Studies Centre for Construction and material analysis.
Testing for drenotube® as a finished product.


Nº C 11X7622 Water flow results under application of pressure
CECAM Report completion date 11/05/2011


Test carried out with EPS geocomposite as a gravel substitute implemented in drenotube®
Nº C 10XF680-R1 Water absorption test gravel replacement particles
Test of geometrical properties of aggregates
Report completion date 28/10/2010

     

Copyright © 2015. All Rights Reserved.